A Homeowner’s Guide to Bedroom Furniture Installation: What to Expect

A Homeowner’s Guide to Bedroom Furniture Installation: What to Expect
Deciding on fitted bedroom furniture is the easy part. What most homeowners really want to know is what actually happens next — how long it takes, how much disruption to expect, and what they need to do before our fitters arrive.
At Aylesbury Bedroom Centre, we install fitted wardrobes and bedroom furniture across Aylesbury and the surrounding villages every week. Here is an honest walkthrough of the process, from first measurements to the final tidy-up.
Before Installation Day
1. The Technical Survey
Once you have signed off your design, we visit your home to take precise measurements. This is different from the initial design consultation. We check wall flatness, floor level, ceiling height, skirting depth, and the position of sockets, radiators, and light switches.
Most bedrooms in older Aylesbury properties are not perfectly square, and that is completely normal. The survey is what lets us build furniture that fits your room rather than an idealised version of it.
2. Manufacturing Lead Time
Your furniture is then made to order. Lead times typically run to a few weeks depending on the range and finish you have chosen. We will confirm a firm installation date once your order is in production, not before — we would rather give you an accurate date late than an optimistic one early.
3. Preparing the Room
In the week before installation, you will need to:
- Empty existing wardrobes and drawers completely
- Remove or arrange disposal of old furniture
- Take down curtains, blinds, pictures, and mirrors on the affected walls
- Clear a path from your front door to the bedroom
- Lift carpets or protect flooring if you are keeping it
If you would like us to handle removal and disposal of your old furniture, tell us at the survey stage so we can build it into the quote.
What Happens on Installation Day
1. Arrival and Protection
Our fitters usually arrive between 8am and 9am. Before any work starts, they lay down protective sheeting on floors and landings and set up a cutting area — normally in a garage, or outdoors when the weather allows.
2. Scribing and Levelling
This is the part that separates a good fit from an average one. Every carcass is levelled and packed, and end panels are scribed to follow the actual line of your walls, skirting, and ceiling. It is slow, careful work, and it is why fitted furniture sits flush where flat-pack never quite does.
3. Assembly and Hanging
Carcasses go in first, then internal fittings — shelves, rails, drawer boxes, shoe racks. Doors are hung last and adjusted so that gaps are even and everything closes softly and squarely.
4. How Long It Takes
A single fitted wardrobe run is often a one-day job. A full bedroom with wardrobes, bedside units, and a dressing area more commonly takes two to three days. Larger projects or rooms with sloped ceilings can run longer, and we will tell you the expected duration in writing before we start.
Living With the Work
Fitted bedroom furniture is one of the least disruptive home improvements you can make. There is no plumbing, and in most cases no structural work. That said, you should expect:
- Noise — drilling and cutting, mostly during the morning
- Dust — we cut outside where possible and use extraction indoors, but some fine dust is unavoidable
- An unusable bedroom — you will need to sleep elsewhere for the duration
Our fitters clear up at the end of each day and take all packaging and offcuts away with them at the end of the job.
After Installation
1. The Handover
Before leaving, your fitter will walk you through the finished furniture, show you how to adjust hinges and drawer runners, and explain how to care for the finish. This is the moment to raise anything you are not happy with — a door alignment, a mark on a panel, a shelf at the wrong height.
2. Snagging
If anything needs adjusting after you have lived with the furniture for a week or two, get in touch. Small adjustments are a normal part of the process, not a sign that something has gone wrong.
3. Caring for Your Furniture
Most finishes need nothing more than a soft, damp cloth. Avoid abrasive cleaners and solvents on painted and supermatt surfaces, and wipe spills promptly rather than letting them sit.
See the Quality Before You Commit
Our bedroom furniture is displayed within the Aylesbury Bathroom Centre showroom on Chamberlain Road — we share the same premises and the same team. It is not a large standalone bedroom showroom, but it does let you open the doors, feel the drawer runners, and compare finishes in person before you decide. If you are travelling any distance, call ahead and we will make sure someone is free to talk you through the ranges.
Talk to Us About Your Bedroom
Every installation starts with a free, no-obligation design consultation. We will talk through your space, your storage, and your budget, and give you a clear picture of timings before you commit to anything.
Call us on 01296 393492, email [email protected], or get in touch online to arrange yours.

